Question 1

whats the outside diameter of the 90mm fitted ring. the part that glues into the suit. aside from why and glue choices could it be glued into a set of latex zipseals that the latex part has worn out? curious if it would fit. View answer

Asked 4 ´years ago | ''Fitted'' Range Dry Glove Rings

Question 2

What makes of manifolds do these fit? View answer

Asked 4 ´years ago | Manifold Plugs (Pair)

Question 3

Will this fit any Dive Rite wing and backplate (e.g., Rec XT)? Just asking because the description says designed specifically for Travel and Voyager wings. View answer

Asked 4 ´years ago | Dive Rite Single Tank Adapter (STA)

Question 4

I received this product: the total Buoyancy control system, and it was delivered within the allotted time frame. Yet My question is that the product came in multiple pieces as the product is not even put together so how do I put this product together? View answer

Asked 4 ´years ago | Total Buoyancy Control System (HOG BP/W Package)

Question 5

Where can I get these regs serviced? Would I have to send them back to you each year? View answer

Asked 6 ´years ago | Illusion Long Hose Regulator Package

Question 6

Will the work with the SiTech quick glove, the first ones? View answer

Asked 4 ´years ago | Super Grip Black Dry Glove

Question 7

I have a Mares Genius with the LED Transmitter, can that transmitter pair to 2 computers? View answer

Asked 6 ´years ago | Quad Air Wrist Computer

Question 8

Will these work with latex seals? View answer

Asked 6 ´years ago | Oval Permanent Wrist System - QCS

Question 9

Is this the service kit for the Edge Escape Octo? View answer

Asked 6 ´years ago | Hog Second Stage Service Kit

Question 10

What is the maximum diameter that this will accommodate. I see that it saysn13 currently ft, but what diameter in inches? View answer

Asked 6 ´years ago | Drysuit Inflation Bottle Mount

Question 11

I currently have the oval si-tech ring system on a Hollis dx 300x, will this system fit right into the permanent rings on the oval system without having to modify the suit? Can pull over gloves be used with the suit portion vs the snap on glove section? View answer

Asked 6 ´years ago | Ultima Dry Glove System

Question 12

Are these compatible with the nuvair, Do they need calibration? View answer

Asked 6 ´years ago | Replacement ATA Helium Sensor

Question 13

Hi, I currently use a size XL glove that came with the Kubi system. Would the 9.5 be sized the same as the XL that Kubi uses? View answer

Asked 6 ´years ago | Super Grip Black Dry Glove

Question 14

Does the perdix come with a battery installed, if so, do you know what kind of battery it is? View answer

Asked 4 ´years ago | Perdix AI Dive Computer

Question 15

Is this a single band, or a pair? View answer

Asked 6 ´years ago | XS Scuba Tank Strap with Plastic Cam Buckle - Pair

Question 16

Can you ship neotek semi dry to Australia View answer

Asked 6 ´years ago | Hollis 8/7/6mm NeoTek V2 Semi-Dry

Question 17

Can I fix these to a Waterproof D7x drysuit with oval seals? View answer

Asked 4 ´years ago | KUBI Dry Glove System

Question 18

Is there a replacement 21700 battery available for this light, or recommended matching battery from another site if not? While I certainly like that the beastie can be recharged in-place, I'd prefer to have a spare as well. View answer

Asked 4 ´years ago | CX2 Handheld Light

Question 19

What kelvin do these burn at? View answer

Asked 6 ´years ago | LD-35 3500 Primary Light

Question 20

Will it work for a garmin virb x View answer

Asked 6 ´years ago | BCD GoPro Mount

Question 21

Hi! Iknow this works for a 75 with double or sidemount.... but will also work for a 75 and single? Thanks! View answer

Asked 4 ´years ago | SMS 75/100 Weight Plate

Question 22

The specs list an optional 20lb lift bailout bladder. Is that available and at what price? View answer

Asked 5 ´years ago | Nomad LS 2.0 Sidemount System - Closeout

Question 23

I wear a size 8 womens/6 mens boot. Usually wear the Caribbean boots (Thicker sole, but short), but also have the echozip short boots. Do I need a Med or Large in this fin? View answer

Asked 5 ´years ago | RK3 Rocket Fins

Question 24

What is the width? View answer

Asked 5 ´years ago | Goodman Handle

Question 25

This drysuit includes thigh pockets standard? View answer

Asked 5 ´years ago

Question 26

does the oasis work in cold water View answer

Asked 5 ´years ago | Oasis Pro Regulator

Question 27

Does this system work with Apollo dry suits? View answer

Asked 5 ´years ago | Oval Permanent Wrist System - QCS

Question 28

I have 2 sets of regulators as follows:- EDGE EPIC 1st and 2nd stage regulator with EDGE ESCAPE octopus.- EDGE EXP 1st and 2nd stage regulator with EDGE ESCAPE octopus.Is this Diaphragm suitable for tools above both the 2nd stage and the octopus? View answer

Asked 5 ´years ago | Exhaust Diaphragm

Question 29

I have a Viking drysuit. Do these work for the suit, and is it necessary to glue the outer ring to the sleeve or can it be used without glueing? View answer

Asked 5 ´years ago | Rubber Pullover Dry Glove Rings

Question 30

How much do these Weigh and what are the dimensions. Is size small men or women's and what equivalent in size? View answer

Asked 5 ´years ago | Closeout Snorkeling Fins

Question 31

Does this suit come with a P-valve? View answer

Asked 5 ´years ago | D7X Nylotech Drysuit

Question 32

Will these work with the pull over type latex gloves? View answer

Asked 5 ´years ago | Oval Permanent Wrist System - QCS

Question 33

IS this the mask and coms? View answer

Asked 5 ´years ago | GSM Mercury Communication Unit

Question 34

Do these fit a aqualung fusion drysuit with the Velcro tabs? View answer

Asked 5 ´years ago | Dry Suit Suspenders

Question 35

Can the Faber HP 40 cubic foot steel tanks be used for shallow, short-duration recreational scuba diving ? View answer

Asked 5 ´years ago

Question 36

I need 2 tank boots for PST 3500 PSI 80 CF tanks with the 7/8"" genesis valves. I want round oots w/o the octogon rims so they will fit my doubles. View answer

Asked 5 ´years ago | Faber Tank Boot

Question 37

What size for thin 6.2 weight approximately 145 View answer

Asked 5 ´years ago | Fusion Tech Skin with Velcro Attachment (Closeout)

Question 38

Do you have Pinnacle TemperateUndergarment in Large Tall? View answer

Asked 5 ´years ago | Temperate Undergarment

Question 39

Will this bulb fit in my uk light cannon 100 hid? If so is it a simple plug and play or will I have to modify? View answer

Asked 5 ´years ago | 10 Watt HID Bulb

Question 40

Does the Hogatharian(sp) require a weight belt? View answer

Asked 5 ´years ago | Hog Hogarthian Package

Question 41

What is the difference in Pinnacle Liberator and evolution 2 ? is the price jump worth it? View answer

Asked 5 ´years ago | Liberator Front Entry Drysuit

Question 42

I am looking for a 90 deg elbow to go on the 1st stage, will this work in that application? View answer

Asked 5 ´years ago | 90-Degree Second Stage Adapter

Question 43

SO if I understand these gloves correctly, they will fit over my dry suit wrist seal and not leave? How do I equalize the pressure in the glove? would I put a straw in under the drysuit wrist seal? Or do I need to worry about it? View answer

Asked 5 ´years ago | Drygloves with Seal

Question 44

Can I use this valve to replace my apeks low profile dump valve ? Or is the drysuit hole a different size ? View answer

Asked 5 ´years ago | High Profile Exhaust Valve

Question 45

For a single tank, size m-l, what is the wt of the SS BP, et of total kit, and lift capacity of the wing? View answer

Asked 5 ´years ago | Elite II Backplate and Wing Package

Question 46

Will this work with the orust neck system? View answer

Asked 5 ´years ago | Neoprene Neckseal for Sitech Neck Systems

Question 47

how long is the hose? is the gauge? Is the gauge removable from the console? View answer

Asked 5 ´years ago | Pressure Gauge with Hose

Question 48

Are your measurements the teeth only or the whole thing with extra at the ends for attachment? I am replacing a waterproof TZip zipper on a Simms Dry Creek Backpack. The teeth from starter to stopper is 35.5"". Would the 36"" be adequate? What kind of glue View answer

Asked 5 ´years ago | TIZIP MasterSeal Drysuit Zipper (Gray)

Question 49

I was wondering about the size of the harness. I am 6'1"", 200lbs. I plan on diving this in the Puget Sound, drysuit, as well as tropical regions with just a wetsuit, swapping out a steel backplate with the aluminum one. Would the ""Standard"" size work? View answer

Asked 5 ´years ago | Total Buoyancy Control System (HOG BP/W Package)

Question 50

does the apeks mtx come with hoses pvd? View answer

Asked 5 ´years ago | MTX Black Regulator

Browse by Topic

Tools